Campagnolo EPS Battery Charger Kit V1

Campagnolo EPS Battery Charger Kit

The Campagnolo EPS Battery Charger Kit allows you to recharge your Campagnolo EPS electronic groupset system by inserting the cable of the dedicated battery charger into the connector located on the lower part of the Power Unit. It is charged directly on the bicycle and it is not possible to detach the battery and charge it when it is not on the bicycle.

There are 2 LEDs on the body of the power supply unit that provide you with useful information to ensure usage is hassle free. The Green LED lights up if it is powered by the mains, an Orange LED means the battery is recharging (once it is charged this LED goes off). Finally flashing Orange LED alerts you of any anomalies during charging.

The battery charger is compatible with - 110-220V voltage and 50-60 Hz frequencies, 12 V voltage for charging in a vehicle (optional cable available separately).

As it is recharging the interface displays the battery charge level, whereas the motors of the rear derailleur and front derailleur are disabled. In this state, even if the magnet is inserted to turn the system off, the battery recharging procedure is not interrupted. It is in no way possible to use battery chargers other than the one provided with the EPS system.

Cable kit not included, so please select one of our available cable kits to complete your system.

Please Note: Due to the technical aspect of EPS, we strongly suggest that you have it fitted by our workshop. Our mechanics are fully trained in all areas including EPS. If this isn't possible then please use a registered Campagnolo EPS trained mechanic who should also fill out an online Campagnolo installation form which will record the details of the build and help with any warranty problems. Failure to comply to these conditions will void any warranty.